Maintenance Tips: How To Care For Soft-Serve Machines

You’ve put in the time to choose the right soft-serve machine. Now make the effort to learn how to properly install it and care for it. Your operator’s manual contains a wealth of information about the use and care of the machine; it’s critical that you follow these procedures to keep the machine in optimal working order.

 

Sanitizing 101

Ice cream and yogurt products produce a remnant bacterial byproduct that has the uncanny ability of finding its way into the back of units as a result of bad or worn seals. This quickly leads to an unforgiving odor and, without regular maintenance of the equipment, this sludge will gum up mechanical parts or drip on controls and relays, ultimately leading to the unit breaking down and a resulting loss of revenue. You can avoid this issue by properly sanitizing the machine regularly.

Health codes mandate sanitizing soft-serve machines to avoid product contamination. Some states require you to test for bacteria throughout the month. Sanitizing these machines usually involves an extra rinsing step with a manufacturer-approved sanitizing agent. Check local health codes for requirements.

Heat-treatment systems on some models can aid in sanitation. A heat-treatment system is the cycling of a daily heating-and-cooling process to safely control bacterial growth. Food-safety standards require a heat-treatment cycle every 24 hours. One company’s heat-treatment option can reduce the frequency of a full-machine disassembly and cleaning to 14-day intervals (28 days in some states). While this can be a great time saver, it doesn’t replace the need to properly wipe down the machine every day. It would also be a smart move to have a checks-and-balance system in place in case the heat-treatment system hits a glitch.

 

Step By Step

You’ll find there are general procedures for cleaning most soft-serve machines but refer to your owner’s manual for specifics on your model.

To start, wash your hands thoroughly. Turn the machine off and wait for existing product to soften. Engage the draw valves and drain product into a clean bucket. When the machine is empty, pour cool water into the hoppers and rinse thoroughly. Drain the water and wipe out all residue from the hoppers.

Take note: many models have a separate wash mode that allows the scrapers to turn without running the freezing cycle; this mode prevents the wash water from freezing in the barrels. When in wash mode, make sure to stop the machine between steps (such as between rinsing the machine with water, then following up with sanitizer) to avoid running the scrapers without any kind of liquid lubrication. If your machine doesn’t have a wash mode, refer to your operator’s manual for proper cleaning procedures.

To sanitize the machine, as mentioned, use a manufacturer-approved sanitizing agent to eliminate bacteria that can cause illness. Pour the sanitizer into the hoppers then run the machine in wash mode another five to 10 minutes. Drain the sanitizer from the machine. Once emptied, flush the sanitizer out of the machine with water. Repeat the flushing two to three times.

Disassemble, wash and sanitize small parts that can still hold bacteria such as the star caps and cylinders. Use brushes to get into the nooks and crannies. Let them soak about 10 minutes. Rinse with cool water and allow to air dry.

Clean or replace the condenser filter—a clogged filter makes the refrigeration system overwork to maintain temperatures because the unit can’t disperse hot air.

 

Reassembling, Restocking

Before reassembling a soft-serve machine, take a few minutes to lubricate certain parts. Usually these include any moving parts that are inside the machine as well as the handles and pins that keep them in place. The owner’s manual will inform you of the proper lubricant and where to apply it. Make certain to use a food-grade, sanitary lubricant.

Replace and restock any worn, damaged parts; stock any parts the manufacturer recommends. They may include O-rings, belts, filters, inserts, gaskets, scraper blades, brushes, and more. Don’t forget to keep sanitizing solution in stock. Most manufacturers have an auto-restock process for items that are bound to wear out from normal operation. Keeping a tune-up kit on hand means you can keep the machine working; otherwise you lose soft-serve sales while you wait for parts to arrive.

If your operation relies on soft-serve profits, it will serve you well to have a good working knowledge of its maintenance requirements. The more you know about the machine and how to care for it, the better it will consistently turn out tasty treats for customers. That experience will bring them back time and time again.

 

Copyright FER May 2017

RELATED CONTENT

Crescent Ice Champagne close up copy

Chill Choices: How To Choose a Cuber

Versatile in fit and function, cubers remain a standby as makers target tech and refrigerant adaptations.

MasterBilt 1200x800

How to Optimize And Organize Your Walk-In Space

A walk-in cooler and the food items stored inside are enormous investments for any business. As with any investment, you want to maximize your return and protect against loss. One…

- Advertisement -

- Advertisement -

- Advertisement -

TRENDING NOW

- Advertisement -

- Advertisement -

- Advertisement -